Codeplugs for specific use (QTH, Car, Portable)

Let’s assume you have the same gear as I have. Three D-878UV Handheld, two D-578UV mobile radio’s, one in the car, one in the QTH. Just by their use they are different.

 

Radio Where located Movement Repeaters in Codeplug Remarks
D-578UVPlus QTH none, static local connects to repeaters nearby, always the same ones
D-878UVPlus Always with me, beltclip often, dynamic Europe or Countries I will travel to connects to repeaters when available otherwise to a hotspot 
D-578UVPlus CAR mounted often, dynamic Europe or Countries I will travel to connects to known repeaters or hotspot, gps-roaming should be enabled for common regions. “Normal” roaming should be configured after your countries band plans

I am lazy and want to get what I want without pressing to much buttons or crawl in lists. That’s why I created three different CP’s each developed with the best performance for the specific use in mind.

QTH: The D-578UV in the QTH knows only my hotspots at home and 8 repeaters nearby. BUT I have multiplied each repeater (channel) 23 times. As the codeplug software does not accept duplicated channel (repeater) names, each repeater name got an addition which represents the TG. I.e. you will find the repeater DB0ANT as DB0ANT World, DB0ANT Germany and so on. In the channel list a different TG is associated for each channel of the same repeater as you can see here in the screenshots:

Zone Edit - pointing to the channels with TG for the QTH zone
Zone Edit – pointing to the channels with TG for the QTH zone

Part of the channel list, repeaters with TG's directly associated
Part of the channel list, repeaters with TG’s directly associated

 

The zones I have defined are the digital repeaters with (QTH) or without (CAR, PORTABLE) associated TG’s, my hotspots, PMR, analog repeaters and European DMR repeaters as seperate zones for each country. The TG-List is still there with all TG’s available worldwide, but for QTH use, I just need the channel knob to switch between talkgroups by using the Channel/TG combination. Very convenient. A roaming list is not needed, as this radio normally does not move.

CAR: Differently constructed is the CP for the D-578UV in the car. Each repeater is marked with the associated Timeslot (TS) and my most used TG. That means i.e. DB0ANT has two entries DB0ANT-Germany (TS1) and DB0ANT-World (TS2) associated by me as a default. That saves channel entries and is used in all DMR zones.

I have in my channel list all (and I mean ALL) European DMR repeaters after this methodology. Countries can be selected by the zone list, where each country has its own entry with the corresponding repeaters associated twice (TS1/TS2 = Germany/World). With one look at the repeater name I can imagine my TS and my TG is also displayed underneath the repeater name. Of course my hotspots are also there, in case I can not reach a repeater and I have a hotspot with me. In such a case I have LTE connection for my DMR hotspot to the WLAN router in the car. In addition I have created a roaming channel list and a roaming zone list for my state, where I travel most. With the roaming switched on, the radio in the car chooses by itself the next reachable repeater. GPS roaming is also switched on.

PORTABLE: The handheld radio has the same channel-list and zones plus the QTH zone with the Channel/TG combination settings. Furthermore it uses roaming zones and roaming channels as well as GPS roaming. Also my hotspot can be used with the handheld, either in the QTH or i.e. in a hotel with internet access or using my portable router where LTE is available.

I hope that my ideas behind these different CP’s became clear to you, if not pls. blame me as I must have explained it in a wrong way.

 

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.