Hotspots einrichten

Mein erster Hotspot war ein ZUMspot von HAM Radio Outlet, gekauft in Plano, TX, USA. Dahinter verbirgt sich ein PI-Zero in einem schönen Gehäuse. Er ist nur für simplex mode geeignet und hat ein OLED Display. Am Anfang hat der ZUMspot bestens funktioniert aber aus irgendeinem Grund (noch nicht näher angeschaut) wurde er instabil. Da ich noch zwei Raspberry Pi 3B hier zu Hause hatte, hab ich einfach zwei MMDVM’s aus Chinesischer Produktion bestellt die mittels pi-star Software betrieben werden. Das Ergebnis sind Duplex-Mode Repeaters die schnell sind und problemlos arbeiten. Mein Aufbau sieht so aus, das ein MMDVM für DMR läuft, der andere ist dediziert für DStar jeweils mit der neuesten Beta Version von pi-star. Der DStar MMDVM hat ein OLED Display und der MMDVM für DMR bedient sich eines Nexion displays, welches schwieriger zu installieren ist als ein OLED Display.

Der allerneueste Hotspot ist der SharkRF openSPOT3, der definitiv in einer weit höheren Liga spielt als die MMDVM’s. Eigene Lithium-Ionen Batterie, bootet binnen 5 sek – interessant für Betrieb im Auto, da im Startmoment der Hotspot (Raspberry pi, mit Dual-Hat) stromlos wird. Raspberries mögen das nicht so wirklich, weshalb ich immer eine Powerbank dazwischen schalte.

Falls Sie viel mehr über Hotspots wissen wollen, versuchen Sie mal diese Webseite, die Tonnen an Informationen bereithält. Darüber hinaus ist die pi-star Webseite, die von Andy Taylor (MW0MWZ) betrieben wird eine gute Informationsquelle wenn man MMDVM Dual-Hats auf einem Raspberry installieren will. Informationen zm openSPOT3 findet man auf der  SharkRF website.

Ich werde hier nicht weiter auf Hotspots, deren Technologie, deren Konfiguration eingehen, als es vermutlich schon 10.000 Seiten dazu gibt. Außerdem: Google ist Dein Freund !!

Hotspots sind ideal bei Antennenverboten oder wenn man unterwegs ist und nicht jeden Repeater kennt, wenn man im Hotel, Krankenhaus ist – oder der Repeater schlicht zu weit weg. Zusammen mit meinem Mobiltelefon in Access Point Mode oder einen LTE/WLAN Router, diese Hotspots sind einfach Klasse ! Speziell der SharkRF ist eine neue Klasse an Hotspot als er durch Hardware transcoding mittels eingebautem AMBE® vocoder chip Bridging zu anderen Technologien aufbauen kann, z.B. von DMR nach C4FM, DStar und umgekehrt.

Setting up hotspots

My first hotspot was a ZUMspot from HAM Radio Outlet, which I bought in Plano,TX. Well it is a PI-Zero in a nice housing, running in simplex mode and has a small OLED display. It worked fine at the beginning but for whatever reasons (never investigated deep into it) it became unstable. As I had to Raspberry 3B at home I ordered two china-made Dual-Hat MMDVM’s for the pistar software. They run much faster and quite unproblematic and in Duplex mode. My setup here is that one Hotspot run’s DMR, the other DStar with the latest pi-star beta-software. The DStar one has an OLED display the DMR one has a colour Nexion display which needs a bit more attention in terms of configuration and preparation for this job.

The latest hotspot I bought is the SharkRF openSPOT3 which plays in a much higher league than the MMDVM ones, as it starts within 5 sec. has a build in lithium battery which is nice in the car, cause starting the car always takes for a short moment the power away and the raspberries do not really like it (use a power-bank in this case).

The MMDVM is quickly installed to the raspberry pi, the only soldering work are the antenna sockets which have to be soldered on the PCB and maybe the connectors for the displays. The OpenSPOT3 comes ready made and needs some easy configuration, much easier than the pi-star software.

 

If you want to know much more about hotspots, try this website, it gives you tons of information. In addition the pi-star website maintained by Andy Taylor (MW0MWZ). Information about the openSPOT3 can be found at the SharkRF website.

I will not dive deeper into the technology or configuration of hotspots, as there are thousands of excellent articles about it in the internet – google is your friend.

Hotspots are ideal if you have antenna restrictions, or you are on the road and do not want to have a repeater list for your whole country or state in the radio, you are in a hotel, clinic or too far away from a repeater. Together with your mobile in tethering mode (mobile is set to WLAN access point) or you have a small LTE/WLAN Router, these hotspots are simply great. Especially the SharkRF one, as it can bridge by hardware transcoding automatically with the built-in AMBE® vocoder chip to other technologies for instance to DMR from C4FM, DStar and vice versa.